Description

T-top Boat Covers are designed to be custom fit for each specific boat model. They are very durable and lightweight when compared to traditional canvas covers. This makes installation for one person very easy. Watch the installation video to see how easy it really is.

T-Top Cover Accessories

Sportsman 251(Heritage)

Return to Model Selection

Materials
*Material Weight (oz)
Materials:
7oz. per lin. yd., 100% polyester, 3 yr. warranty Available Colors: Black
9oz per lin. Yd. 100% polyester 5 yr warranty. Available Colors: Navy and Black.
Sunbrella, 9.25oz per lin. yd. acrylic fabric, 6 yr warranty. Available Colors: Black, Marine Blue and Smoke.
9 oz. fabrics are solution dyed, 100% polyester and are extremely breathable. In solution dyed fabrics, the color is introduced into the polyester while in its solution state. This allows the color to run evenly throughout the diameter of the fiber so it will not rub off or bleed onto the boat. The polyester material is lightweight, does not stretch and hardly fades in color over the life of the material.
*The warranty listed is the fabric warranty; please see our warranty page for more details on your products’ entire warranty.
Fabric & Color
*Color

*Color

*Color
Materials

Fabric Colors
Cover Options
*How is your boat stored?

*
Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

I acknowledge

*
Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

I acknowledge

*Zipper Access Side
Starboard Side Please select a port or starboard side zipper entry for your cover.
The zipper entry will be located in-line with the helm seat.
Boat Options
*Year

*T-Top Type
T-Top Styles
Hard Top
Hard Top with Aft Support Bars

Lace On Canvas Top
Key West Style Top

Other (explain aftermarket)

*Do you have Aft Support Bars?

Yes

No

*Boat Style
Boat Styles
Our covers are specifically designed for each style of boat.
Center Console Boat
Dual Console Boat

Walk Around Boat
Catamaran Center Console Boat
*
You have selected "Sea Pen" as your storage option. Please call our office to order.
Select the option below to be taken to our Contact page or you may select another Boat Storage option above to continue with your order.

Take me to the Contact Us page
Motor Options
*Motors

*Make

*Motor Size

*Has your boat been re-powered?
A re-powered motor means the motor has been upgraded or there has
been a change in the motor style from the original factory motor.

Yes

No

*Year boat was repowered
Bow Options
*Bow Rails
Bow Rail Styles
No Bow Railt
Low Bow Rail (Less than 8")

Recessed Bow Rail
High Bow Rail (More than 9")

Walkthrough Bow Rail
Other

*Bow Accessories
Bow Accessories
No Bow Accessories
Bow Roller

Through Hull Anchor
Bow Pulpit

Other

*Trolling Motor

*
There are a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit

I Agree
Additional Options
*Ski / Tow Bar
Ski or Tow Bars
I do not have a ski or tow bar
My bar is over the top of the engine

My bar is in front of the engine
Other

*Jack Plate
If you have a jack plate please choose which size.

*Power Poles / Shallow Water Anchor
Power Poles
Motor Bracket Mount
Motor Bracket Mount

Transom Mount
Transom Mount

Other
You have selected Power Poles as an option. In order to accommodate for your Power Pole cutout, we will need the following photographs and measurements which can be added in the form below.
Alternatively you can email this information to us by downloading a Form Here.

1 | Upload photo showing the whole back (aft section) of the boat.

Take a photo showing the whole back (aft section) of the boat and upload below:

(max file size 256 MB)

2 | Upload photo showing the port/starboard side where the Power Pole is located.

Take a photo showing the port/starboard side where the Power Pole is located.
If you have dual Power Poles, be sure to take photos of both the port and starboard sides and upload below:

(max file size 256 MB)

3 | Select Options

Mount Type

Distance from the side of the motor to the side of the Power Pole. (inches)

Distance from the side of the Power Pole to the outside edge of the boat. (inches)

Distance from the rub rail to the side of the Power Pole. (inches)
You have selected Power Poles as an option. In order to accommodate for your Power Pole cutout, we will need the following measurements which can be added in the form below.
Alternatively you can email this information to us by downloading a Form Here.

1. Distance from the side of the motor to the side of the Power Pole. (inches)

2. Distance from the side of the Power Pole to the outside edge of the boat. (inches)

3. Distance from the rub rail to the side of the Power Pole. (inches)
If you have selected "Other" for any answers, please enter description below. Please list any aftermarket products that may affect the fit of the cover. Please include if you have raptor or talon powerpoles.

Would you like to add a Universal Storage Bag to your order?

Yes

No

*Universal Storage Bag
Size Suggestions:
Medium storage bags are suggested for boats 22ft and smaller.
Large storage bags are suggested for boats 23ft-26ft.
X-Large storage bags are suggested for boats 27ft and larger.